|
Vikosmo VK-100APg Wireless 802.11b/g Access Point
|
MSRP: 0
Your Price: Click Buy It for low price
Shipping:
Manufacturer: Vikosmo
Prices subject to change. Please verify price during checkout.
|
|
Vikosmo VK-100APg Wireless 802.11b/g Access Point Features
|
Complies with IEEE 802.11b/g standard
LAN Interface: One 10/100 BaseT with RJ-45 connector
Data Rate: 54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps auto fallback
Security: 1 - 64/128-bit WEP Data Encryption, WPA, WPA2 2 - Built-in Firewall, MAC Filter 3 - Password protection for system management
Diagnostic LEDs: Power - Green, Link - Green, WLAN - Green
|
|
|
|
|
|
Additional Vikosmo VK-100APg Wireless 802.11b/g Access Point Information
|
There are 6 modes in VK-100APg: AP mode: setting this mode in VK-100APg acts as a communication hub for users of a wireless device to connect to a wired LAN environment. VK-100APg is important for offering heightened wireless security and for extending the physical range of service a wireless user has access to. Client mode: setting this mode in VK-100APg can communicate with each other by first going through an Access Point (AP), and requires access to the wired LAN in order to use services such as file servers or printers. Bridge mode: setting this mode in VK-100APg can communicate directly with each other, without the use of an access point (AP). It is also referred to as peer-to-peer mode. WDS mode: WDS is short for Wireless Distribution System. If your installations where one Access Point isn't enough to provide a good coverage, set this mode in several VK-100APg (several Access Points) which extend your coverage to connect your network environment. Universal Repeater mode: it is also a good way to extend your network coverage, and doesn't require the remote wireless devices have WDS function. RADIUS mode: specifies the RADIUS server information if you have an external RADIUS (Remote Authentication Dial-In User Service) server to authenticate a user.
|
|
|
 |
|
|
